| Product
Highlights
12-Printhead Design
- Twelve printheads, each nearly one-inch-wide provide
more coverage for faster print speeds without sacrificing
print quality. The use of two sets of 6-color inks
deliver outstanding 1200 dpi apparent image quality
at up to 400 sq. ft. per hour.
AutoInk Swapping
- DisplayMaker's twelve-printhead design allows you
to have both dye-based inks and pigmented inks loaded
simultaneously and to have the advantage of printing
using either without changing ink.
Show Your True Colors
- Only the DisplayMaker Mach 12 has a twelve (12)
color ink set designed to accurately reproduce those
difficult corporate logo colors while delivery an
apparent 1800 dpi image resolution. The set consists
of Cyan, Magenta, Yellow, Black, Red, Blue, Green,
Orange, Medium Cyan, Medium Magenta, Light Cyan and
Light Magenta. See for yourself what 12 colors can
do to improve you image.
Modular Ink Delivery
System - A three piece ink system consisting of
a 960 ml ink reservoir, semi-permanent supply tubing
and state-of-the-art thermal inkjet printhead. Ink
reservoirs can be 'hot swapped' while printing for
maximum productivity. Printheads are replaced independently
of ink modules and typically last through multiple
liters of ink, thereby significantly reducing operating
costs.
Dual Automation
Eye - Two image sensors and sophisticated software
are used to automate the calibration tasks required
to maintain good print quality and accurate color
reprodution. With a touch of a button, all 12 printheads
are aligned with digital accuracy and over 6000 jets
are analyzed. Any jets that are out of specification
are replaced with others to eliminate printing artifacts
and extend the life of the printheads. These high
quality sensors also perform color linearization and
double as a color spectrophotometer to create you
own color profiles.
Dual Force Air Dryers
- Designed to dry prints even at higher print speeds.
Tilt-Up Carriage
Assembly - For easy access, the carriage assembly
can be tilted up to expose the bottom sides of the
printheads and image sensors for periodic cleaning
without affecting printhead alignment and calibration.
72", 60",
42" (183cm, 152cm, 107cm) Widths - Offers
a size to meet your specific needs. Industry leading
72" width permits double-up production of E-sized
(34" x 44") or AO-sized (841mm x 1189mm)
prints or wall-size murals with minimal tiling.
Product Specifications
Print Technology
- Thermal Inkjet
Max Width - 71.5 inches (181.6 cm), 59.5 inches
(151.1 cm), 41.5 inches (105.4 cm)
Print Heads - 12
Max. Print Speed
 2
Pass: 400 sf/h (37.2 m2/h)
4 Pass: 200 sf/h (18.6
m2/h)
6 Pass: 150 sf/h (13.9
m2/h)
8 Pass: 100 sf/h (9.3
m2/h)
Media TakeUp - Standard, closed-loop motion
control
OnBoard Dryer - Standard, heated forced-air
Media Cutter - Manual
Ink Type - Water based
Ink Dye
EnduraChrome: Cyan, Magenta, Yellow, Black, Medium
Cyan, Medium Magenta, Light Cyan, Light Magenta, Orange,
Green, Red and Blue
Ink Pigment
PermaChrome: Cyan, Magenta, Yellow, Black, Medium
Cyan and Medium Magenta
Ink Capacity
11.688 liters (twelve 960 ml ink modules, twelve 14
ml printheads)
|
Product
Brochure - 